Learn basic controller functions and flight characteristics of the drone. Maintain altitude control while flying in a box shape with and without sensors in Line of Sight (LOS). Students should be able to maintain steady altitude control and fly in a box shape to complete this activity.
Download PDF| Activity Type | Basic Control |
| Activity Time | 10-20 Mins |
| Student Groups of | 1-6 |
| Difficulty | Medium |
| Supplies | Safety Gear, Drone, Controller, Batteries, Landing Pads |
| Designated Flight Area | Clear area free of obstructions and moving air. Recommend atleast 10x10 ft. |
Site Safety Inspection
Preflight Inspections
Step 1
Power on your launch controller and drone.
Step 2
Ensure the drone is in low speed and Normal Mode by flipping both switch A & C fully down.
Do not change flight modes during flight!
Step 3
Ensure the left joystick (throttle) is in the down position on startup then bring your drone up to shoulder level at a safe distance.
Step 4
Once drones are at shoulder level, each pilot should use the right stick (pitch/roll) to apply input up/down and left/right to move the drone in a box shape about 3 feet in each direction.
Use gentle pressure and fine movements to adjust the joysticks.
Step 5
Land and repeat this challenge 5 times.
Step 6
Land and change to Sport mode by flipping switch A to the mid position. Then repeat steps 3-5.
Step 7
Complete Post Flight Checklist.
Post Flight Checklist
Power Up Mode: Advanced
Students who have mastered this skill in Normal and Sport Mode may attempt the Power Up Mode and change the orientation of the drone at each corner by 90 degrees left or right.