Classroom Drone:FAQDownload PDF
| Problem | Reason | Solution |
|---|---|---|
| One controller is sending signals to multiple drones? | More than one drone went through the binding procedure. | Power off the bound drones/controller and complete the binding procedure one drone at a time |
| Drone drifts to one direction? | Moving air? Hair in motors? If not, the trim may need to be adjusted. | Perform drift/trim calibration |
| Battery does not fit into battery tray? | Puffy or deformed battery. | Follow battery disposal guidelines |
| Sensors not working? | Sensors work in normal mode only. | Use right joystick press to switch modes, then attempt sensor mode again |
| 3D stunt mode not working? | Low battery mode, indicated by blinking lights, limits 3D stunt mode | Land and replace batteries |
| Drone autolanding? | Low battery mode, indicated by blinking lights | Land and replace batteries |
| Drone motors won’t turn off? | Sensors are not aligned with drone altitude/attitude | Disarm motors by holding both joysticks down and inward until motors stop spinning |