Learn basic controller functions and flight characteristics of the drone. Maintain altitude control while flying the drone side to side with and without sensors in Line of Sight (LOS). Students should be able to maintain steady altitude control and roll left and right to complete this activity.
Download PDF| Activity Type | Basic Control |
| Activity Time | 5-10 Mins |
| Student Groups of | 1-6 |
| Difficulty | Easy |
| Supplies | Safety Gear, Drone, Controller, Batteries |
| Designated Flight Area | Clear area free of obstructions and moving air. Recommend atleast 10x10 ft. |
Site Safety Inspection
Preflight Inspections
Step 1
Power on your launch controller and drone.
Step 2
Ensure the drone is in low speed and Normal Mode by flipping both switch A & C fully down.
Do not change flight modes during flight!
Step 3
Ensure the left joystick (throttle) is in the down position on startup then bring your drone up to shoulder level at a safe distance.
Step 4
Once drones are at shoulder level, each pilot should use the right stick (roll) to apply input left or right to move the drone left and right about 3 feet.
Use gentle pressure and fine movements to adjust the roll.
Step 5
Land and repeat this challenge 5 times.
Step 6
Land and change to Sport mode by flipping switch A to the mid position. Then repeat steps 3-5.
Step 7
Complete Post Flight Checklist.
Post Flight Checklist
Power Up Mode: FPV Experience
Students who have mastered this skill in Normal and Sport Mode may attempt the Power Up Mode and complete this activity with FPV Goggles. Ensure channel frequencies are set properly. Refer to FPV Channel Settings.